TicTacTalks ForumPosted by Milan
November 6, 2006 - 08:53PM cet
IP : 24.148.1.137
Email : asanovicmilan@yahoo.com
Maltese Falcon has landed
Perini Navi successfully completed the first trial sail of the 88m Clipper Yacht the Maltese Falcon last Wednesday in an 8-16knt offshore breeze on the Bosphorus sea.
Tom Perkins the owner, who acted as project manager during both project conception and construction of his vessel, commenting on the first sail said: "The Maltese Falcon has written a new page in the history of yachting, the DynaRig is no longer an experimental concept. Everything worked as engineered and the yacht achieved some remarkable numbers: hard on the wind in 15.8 knots true, at 38 degrees relative wind angle, we sailed with no fuss or strain at 10.5 knots. On a close reach at 60 degrees relative angle, the speed (still at knots 16 true wind) climbed to 14 knots. The balance is, essentially, perfect - with weather helm never exceeding 0.6 degrees on the wind, or 2.5 degrees on a fast reach.
"The angle of heel was around 15 degrees, but in a puff, once touched 20 degrees. The leeway angle was well under 5 degrees (without the daggerboard in place). Since it was our first day out, and we wanted to be careful, these results were achieved with the topgallants and the royals furled - so we expect even better numbers in further tests. The maximum loading on the masts never much exceeded 50 per cent of our (very, very, conservative) limit, so, we have plenty of room for some even better results."
The engine trials were also a great success: the specification called for 18 knots, but she achieved nearly 20 (19.6) knots, with minimal wave making and virtually no vibration with a smooth and non-turbulent wake. At full power the two 1,800hp Deutz engines - which turn at only 1,800rpm - made almost no noise; so little that the sound from the air-conditioning in the aft cabins was louder than the sound from the engines.
The Maltese Falcon's design and construction has been a collaboration between Perini Navi, Ken Freivokh, and Dijkstra & Partners. Her three carbonfibre masts, manufactured and assembled at the Yildiz Gemi yard in Tuzla under the supervision of the English company Insensys are free-standing and rotating, an absolute world-first for an application of this size and complexity. Based on the DynaRig square rig concept - developed with Gerry Dijkstra & Partners of Holland, each mast carries five separate square sails supplied by Doyle Sails.
The Maltese Falcon's stunning interior was designed by Ken Freivokh and supplied by German based Sinnex. Her accommodations can be configured from four to six stateroom suites.
Maltese Falcon statistics
LOA: 88,0 m 289.1 ft
Waterline Length: 78,2 m 256.6 ft
Beam: 12,6 m 42.2 ft
Draft: 6,0 m 19.7 ft
with dagger board 11,0 m 36.0 ft
Mast Head Height: 58,2 m 191.0 ft
Sail area: 2.396,0 m2 25,791.0 ft2
Displacement: 1.240,0 t 1,366.0 US tonnes
Ballast: 200,0 t lead, 50 t salt water
Charter available for Cool 335,000 Euro's per week.
More about it Maltese Falcon
For more info Linky 
